Anomaly detection in a cutting tool by K-means clustering and Support Vector Machines

This paper concerns the analysis of experimental data, verifying the applicability of signal analysis techniques for condition monitoring of a packaging machine. In particular, the activity focuses on the cutting process that divides a continuous flow of packaging paper into single packages. The cutting process is made by a steel knife driven by a hydraulic system. Actually, the knives are frequently substituted, causing frequent stops of the machine and consequent lost production costs. The aim of this paper is to develop a diagnostic procedure to assess the wearing condition of blades, reducing the stops for maintenance. The packaging machine was provided with pressure sensor that monitors the hydraulic system driving the blade. Processing the pressure data comprises three main steps: the selection of scalar quantities that could be indicative of the condition of the knife. A clustering analysis was used to set up a threshold between unfaulted and faulted knives. Finally, a Support Vector Machine (SVM) model was applied to classify the technical condition of knife during its lifetime

Gli utilizzi del sughero in applicazioni innovative: presentazione del rapporto di ricerca

2009-06-24Sala riunioni Consorzio ZIR Zona Industriale Tempio Pausania (OT) - ItaliaSeminario informativo sui risultati dell'azione cluster del progetto "Innovazione e valorizzazione del sughero

Condition monitoring and reliability of a resistance spot welding process

The reliability of a resistance spot welding (RSW) process is studied monitoring the quality of the corresponding welding points. Each welding point is uniquely represented by a specific resistance characteristic curve over time. Five learning resistance characteristic curves, the good quality of the related welding points was experimentally verified by means of a non-destructive technique, are selected as a reference to check the quality of welding points related to different process resistance characteristic curves. A first estimate of the quality of the welding point is made comparing the corresponding process resistance characteristic curve with the learning maximum, minimum and average resistance characteristic curves. Both good quality and defective (glued or squeezed) welding points are observed. In order to more correctly identify the quality level of each welding point, two different parameters comparing the related process resistance characteristic curve with the learning average resistance characteristic curve are applied. First, the residual resistance, as the difference at each instant of time between the two resistance characteristic curves, is considered. Then, the Euclidean distance, as the geometric distance at each instant of time between the two resistance characteristic curves, is adopted. Finally, the trend of the quality of the welding points as their number increases for welding electrodes with a fixed number of dressings is investigated

Statistical evidence of central moment as fault indicators in ball bearing diagnostics

This paper deals with post processing of vibration data coming from a experimental tests. An AC motor running at constant speed is provided with a faulted ball bearing, tests are done changing the type of fault (outer race, inner race and balls) and the stage of the fault (three levels of severity: from early to late stage). A healthy bearing is also measured for the aim of comparison. The post processing simply consists in the computation of scalar quantities that are used in condition monitoring of mechanical systems: variance, skewness and kurtosis. These are the second, the third and the fourth central moment of a real-valued function respectively. The variance is the expectation of the squared deviation of a random variable from its mean, the skewness is the measure of the lopsidedness of the distribution, while the kurtosis is a measure of the heaviness of the tail of the distribution, compared to the normal distribution of the same variance. Most of the papers in the last decades use them with excellent results. This paper does not propose a new fault detection technique, but it focuses on the informative content of those three quantities in ball bearing diagnostics from a statistical point of view. In this paper, a discriminant function analysis is used, to determine which central moment has a high discrimination power in the diagnostics of ball bearing in stationary conditions

Experimental Evidence of the Speed Variation Effect on SVM Accuracy for Diagnostics of Ball Bearings

In recent years, we have witnessed a considerable increase in scientific papers concerning the condition monitoring of mechanical components by means of machine learning. These techniques are oriented towards the diagnostics of mechanical components. In the same years, the interest of the scientific community in machine diagnostics has moved to the condition monitoring of machinery in non-stationary conditions (i.e., machines working with variable speed profiles or variable loads). Non-stationarity implies more complex signal processing techniques, and a natural consequence is the use of machine learning techniques for data analysis in non-stationary applications. Several papers have studied the machine learning system, but they focus on specific machine learning systems and the selection of the best input array. No paper has considered the dynamics of the system, that is, the influence of how much the speed profile changes during the training and testing steps of a machine learning technique. The aim of this paper is to show the importance of considering the dynamic conditions, taking the condition monitoring of ball bearings in variable speed applications as an example. A commercial support vector machine tool is used, tuning it in constant speed applications and testing it in variable speed conditions. The results show critical issues of machine learning techniques in non-stationary conditions